
Sublimated Jersey Problems: Colour Shift, White Creases, Dye Migration and Pilling – Causes and Fixes
Published · Last updated · Reviewed by the RUIJUN production team
Short answer: most problems with sublimated jerseys come from four things: colours that look different on screen and on fabric, fabric that folds or moves during heat transfer (white lines or blurred “ghost” prints), heat-applied numbers or prints on dyed polyester that pick up colour from the fabric (dye migration), and wear damage such as snags and pilling. Sublimation itself does not crack or peel, because the ink becomes part of the polyester fibre. At RUIJUN every printed panel is inspected before it reaches the sewing line, so print faults are caught before a jersey is made, and any factory-caused defect reported within 7 days is remade free or credited.
Problem by problem
| Problem | What you see | Main cause | How it is prevented |
|---|---|---|---|
| Colour shift | Red looks orange, navy looks purple | Screens show RGB light; fabric shows ink. Mesh and interlock also take colour differently | Work from Pantone references, approve a sample for critical colours |
| White crease lines | Thin unprinted lines across the design | Fabric folded or wrinkled during heat transfer | Fabric relaxed and flattened before printing; panel inspection before sewing |
| Ghosting / blur | Double edges or a faint shadow | Paper or fabric moved during transfer | Panels checked before sewing; blurred panels are reprinted |
| Dye migration | White heat-press numbers turning pink or grey | Dyed polyester releases dye into vinyl or plastisol applied on top with heat | Sublimate names and numbers into the fabric instead of pressing them on |
| Misaligned pattern at seams | Stripes or graphics that do not line up | Panels cut before printing or cut inaccurately | Print first, then laser-cut the printed panels |
| Fading | Dull colours after a season | Bleach, chlorine, very hot drying – not normal washing | Follow the care label; see our care guide |
| Snags and pilling | Pulled loops or fuzz balls on mesh | Velcro, rough surfaces, washing with towels | Wash inside out, close Velcro; anti-pilling fabrics available on request |
| Cracking or peeling | Numbers or logos cracking | Happens with heat transfers and screen prints, not with sublimation | Choose sublimated logos and numbers on polyester |
Why sublimation avoids most of these
In dye sublimation the design is printed on transfer paper and heat turns the ink into a gas that bonds with the polyester fibres. The print adds no layer on top of the fabric, so nothing can crack, peel or wash off, and extra colours, gradients, names and numbers cost nothing extra. The trade-offs are that it only works on light-coloured polyester and cannot print white or metallic colours – see our guide to colour matching team uniforms.
How our process catches faults
- Designs are printed on six Epson SureColor F9480 wide-format printers and transferred on three roller heat calenders.
- Printed panels are laser-cut on eight computer-controlled cutters, so cut lines follow the printed pattern.
- Every panel is checked for colour accuracy, print defects and size before sewing – a bad panel is reprinted, not sewn into a jersey.
- Finished garments get a 100% final inspection, and you receive photos or video before shipment.
More detail is in our quality control guide and production process.
What to check when your kit arrives
- Count pieces and sizes against the packing list.
- Check names and numbers against your roster.
- Look at one jersey of each size in daylight for lines, blur and colour.
- Report anything wrong within 7 days with photos or a short video – factory-caused faults are remade free or credited.
Lab tests that show whether a fabric will hold up
If colour loss or pilling worries you, ask for test results on the fabric rather than relying on a description. Three published methods cover the problems in the table above.
| Test method | What it measures | When it is useful |
|---|---|---|
| ISO 105-C06 (2010) | Colour fastness to domestic and commercial laundering | Clubs that wash kit at high volume or use a laundry service |
| AATCC TM61 | Colour loss and surface change in an accelerated wash; one 45-minute test roughly approximates five typical home launderings | US buyers who want a quick check of wash durability |
| ISO 12945-2 (2020) | Resistance to pilling, fuzzing and matting, using a modified Martindale tester | Mesh and interlock training kit that rubs against bags, bibs and Velcro |
These tests check the fabric, not the print quality of one jersey. Crease lines, ghosting and misaligned seams are production faults, and they are caught by inspection, not by a lab report. Ask which fabric and colour a report covers, because results can differ between colours of the same fabric.
Factory fault or wear and care?
The quickest way to settle a problem is to know which side of the line it falls on before you report it.
| What you see | Usually caused by | What to send us |
|---|---|---|
| White lines, blur or a misaligned pattern on new kit | Production | Photos of the front, back and size label of each affected piece |
| Wrong colour compared with the approved sample | Production | A photo in daylight next to the sample, plus the Pantone reference you supplied |
| Wrong name, number or size against the confirmed order sheet | Production | The row from the order sheet and a photo of the jersey |
| Colour that matches the sample but not your screen | Screen versus ink | Nothing to claim – approve a sample next time |
| Pilling, snags or dull colours after a season | Wear, Velcro, bleach or hot drying | Usually not a defect; follow the care guide |
Worked example: a fault on a 20-set order
Worked example (ex-factory prices, 2026), using our soccer price list. A club orders 20 adult sets (jersey and shorts) with names and numbers.
- Order value: 20 × US$9.5–11 (20–49 pcs tier) = US$190–220. Names and numbers are sublimated and included, so there is no extra print charge.
- On delivery, two jerseys show white crease lines. The club sends photos within 7 days.
- Because the fault is factory-caused, the two pieces are remade free or credited. A credit would be worth 2 × US$9.5–11 = US$19–22.
Compare that with a club that orders heat-pressed white vinyl numbers on dark dyed polyester. If the numbers turn pink through dye migration, the whole set may need new numbers. Sublimating names and numbers avoids that risk and costs nothing extra.
How to avoid problems before you order
- Send Pantone references, not screen colours – see which Pantone codes to send.
- Approve a physical sample for club colours that must match. Our sample policy explains costs and credits.
- Choose the right fabric: mesh breathes but snags more easily than interlock – compare them in interlock vs mesh vs pique.
- Sublimate names and numbers on polyester instead of pressing vinyl on top.
- Check one piece of each size as soon as the cartons arrive, so any claim falls inside the 7-day window.
How RUIJUN handles this
- Inspection: every printed panel is checked for colour, print defects and size before sewing, and every finished garment gets a final inspection with photos or video before shipment.
- Minimum and price: 10 pieces per design; sublimated soccer sets from US$9.5–11 at 20–49 pieces, with names and numbers included.
- Samples and timing: a sample of your own design costs US$50–150 and takes 5–10 days; bulk takes 10–20 days.
- Guarantee: factory-caused defects reported within 7 days are remade free or credited – see our after-sales guarantee.
Sources
- ISO – ISO 105-C06:2010 Colour fastness to domestic and commercial laundering (2010) – the laundering colour-fastness method in the test table.
- AATCC – TM61 Colorfastness to Laundering: Accelerated (2013, reaffirmed 2020) – one 45-minute test roughly approximates five typical home launderings.
- ISO – ISO 12945-2:2020 Pilling, fuzzing and matting, modified Martindale method (2020) – the pilling test in the test table.
FAQ
Will sublimated jerseys fade? Not with normal washing – the colour is inside the fibre. Bleach, chlorine and very hot tumble drying are what dull them. See how to care for sublimated jerseys.
Why did my old heat-press numbers turn pink? That is dye migration from the dyed fabric into the white vinyl. Sublimated numbers cannot migrate because they are part of the fabric.
Can sublimation go on cotton? No. It needs polyester. Cotton-blend hoodies are decorated with screen print, embroidery or heat transfer instead.
Can I see a sample before bulk? Yes. A sample of your own design costs US$50–150 and is credited on bulk orders of 100+ pieces.
Can you send colour-fastness or pilling test results? Ask when you request a quote and tell us which fabric and colour you plan to use, so we can confirm what is available for that fabric before you order.
Who decides whether a fault is a defect? We compare the photos you send with the approved sample and the confirmed order sheet. Faults caused in production and reported within 7 days are remade free or credited.
Need custom uniforms?
MOQ 10 pcs · Free mockup · Samples in 5–10 days. Get a quote →
Ready to start your custom uniform?
Send your design or idea today and get a free mockup and quote within 24 hours.